- Previous thread: PATCH - V4L/DVB: tvp7002: fix write to H-PLL Feedback Divider LSB register
- Next thread: DVBT +AF9015 +MXL5007t
- Threads sorted by date: linux-media 201007
Hi I've read through the earlier thread about the driver for this here: http://www.mail-archive.com/linux-media@vger.kernel.org/msg03661.html
First I've used the default Ubuntu Lucid kernel driver (2.6.32) - kaffeine, scan etc work, mythtv scanning finds channels, times out, and channels get added as not visible. LiveTV crashes mythtv - see my report here: http://mythtv.org/pipermail/mythtv-users/2010-July/293751.html
I also used hg clone to check out the current v4l tree (on Saturday 24/07/2010) - same
Then I tried the latest version I could find http://linuxtv.org/hg/~anttip (last change 5 weeks ago) but still no joy (exactly the same problems).
Another issue - as far as I understood the earlier discussion - Antti mentioned that the card reports two tuners. I've noticed that I can not tune any HD channels (though I think I should be in reach). Maybe the second tuner is the HDTV tuner?
Any help appreciated. Mythtv recording is working fine btw once I manually manipulate the channels table. It seems like mythtv after the scan tries to tune to each channel in turn and get some info from it and that's what times out at that stage. The crash that happens with LiveTV is documented on the mythtv-users list (see above) - I also posted it to mythtv-devel but strangely they didn't want it
Thanks for writing the driver in the first place!
mimo
More majordomo info at http://vger.kernel.org/majordomo-info.html
First I've used the default Ubuntu Lucid kernel driver (2.6.32) - kaffeine, scan etc work, mythtv scanning finds channels, times out, and channels get added as not visible. LiveTV crashes mythtv - see my report here: http://mythtv.org/pipermail/mythtv-users/2010-July/293751.html
I also used hg clone to check out the current v4l tree (on Saturday 24/07/2010) - same
Then I tried the latest version I could find http://linuxtv.org/hg/~anttip (last change 5 weeks ago) but still no joy (exactly the same problems).
Another issue - as far as I understood the earlier discussion - Antti mentioned that the card reports two tuners. I've noticed that I can not tune any HD channels (though I think I should be in reach). Maybe the second tuner is the HDTV tuner?
Any help appreciated. Mythtv recording is working fine btw once I manually manipulate the channels table. It seems like mythtv after the scan tries to tune to each channel in turn and get some info from it and that's what times out at that stage. The crash that happens with LiveTV is documented on the mythtv-users list (see above) - I also posted it to mythtv-devel but strangely they didn't want it
Thanks for writing the driver in the first place!
mimo
More majordomo info at http://vger.kernel.org/majordomo-info.html
Just as a follow up when I run with debug=1then I get this when the soup hits the fan:
[20057.560929] af9013-init
[20057.560942] af9013-reset
[20057.564856] af9013-power-ctrl: onoff:1
[20057.568983] af9013-set-adc-ctrl: adc-clock:28000
[20057.568993] af913-div: a:28000000 b:1000000 x:19
[20057.569002] af913-div: a:0 b:1000000 x:19 r:14680064 r:e00000
[20057.569008] af9013-set-adc-ctrl: adc-cw:00 00 e0
[20057.573979] af9013-init: load ofsm settings
[20057.630229] af9013-init: load tuner specific settings
[20057.684977] af9013-init: setting ts mode
[20057.686473] af9013-lock-led: onoff:1
[20057.687480] af9013-i2c-gate-ctrl: enable:1
[20057.688225] af9013-i2c-gate-ctrl: enable:1
[20057.689599] af9013-i2c-gate-ctrl: enable:0
[20057.690349] af9013-i2c-gate-ctrl: enable:1
[20057.692102] af9013-i2c-gate-ctrl: enable:0
[20057.692978] af9013-i2c-gate-ctrl: enable:1
[20057.708103] af9013-i2c-gate-ctrl: enable:0
[20057.708599] af9013-i2c-gate-ctrl: enable:0
[20057.789900] af9013-set-frontend: freq:482000000 bw:0
[20057.789914] af9013-i2c-gate-ctrl: enable:1
[20057.791984] af9013-i2c-gate-ctrl: enable:0
[20057.792724] af9013-i2c-gate-ctrl: enable:1
[20057.794098] af9013-i2c-gate-ctrl: enable:0
[20057.794984] af9013-i2c-gate-ctrl: enable:1
[20057.810104] af9013-i2c-gate-ctrl: enable:0
[20057.810598] af9013-i2c-gate-ctrl: enable:1
[20057.811977] af9013-i2c-gate-ctrl: enable:0
[20057.812805] af9013-i2c-gate-ctrl: enable:1
[20057.830352] af9013-i2c-gate-ctrl: enable:0
[20057.986992] af9013-i2c-gate-ctrl: enable:1
[20057.990222] af9013-i2c-gate-ctrl: enable:0
[20058.090765] af9013-set-coeff: adc-clock:28000 bw:0
[20058.090775] af9013-set-coeff: coeff:02 9c bc 15 05 39 78 0a 00 a7 34 3f 00 a7 2f 05 00 a7 29 cc 01 4e 5e 03
[20058.101485] af913-div: a:4570000 b:28000000 x:23
[20058.101498] af913-div: a:18560000 b:28000000 x:23 r:1369140 r:14e434
[20058.101506] af9013-set-freq-ctrl: freq-cw:cc 1b 6b
[20058.102597] af913-div: a:4570000 b:28000000 x:23
[20058.102606] af913-div: a:18560000 b:28000000 x:23 r:1369140 r:14e434
[20058.102613] af9013-set-freq-ctrl: freq-cw:cc 1b 6b
[20058.103732] af913-div: a:4570000 b:28000000 x:23
[20058.103741] af913-div: a:18560000 b:28000000 x:23 r:1369140 r:14e434
[20058.103748] af9013-set-freq-ctrl: freq-cw:34 e4 14
[20058.109474] af9013-set-frontend: auto TPS
[20058.111108] af9013-update-signal-strength
[20058.907974] af9013-get-frontend
[20060.223964] af9013-update-signal-strength
[20060.246843] af9013-update-ber-unc: err bits:99 total bits:16320000 abort count:0
[20062.155949] af9013-update-signal-strength
[20062.178571] af9013-update-ber-unc: err bits:107 total bits:16320000 abort count:0
[20063.786934] af9013-update-signal-strength
[20063.810685] af9013-update-ber-unc: err bits:159 total bits:16320000 abort count:0
[20065.522920] af9013-update-signal-strength
[20065.546670] af9013-update-ber-unc: err bits:170 total bits:16320000 abort count:0
[20067.506902] af9013-update-signal-strength
[20067.530529] af9013-update-ber-unc: err bits:73 total bits:16320000 abort count:0
[20069.778884] af9013-update-signal-strength
(loads of these)
mimo
More majordomo info at http://vger.kernel.org/majordomo-info.html
[20057.560929] af9013-init
[20057.560942] af9013-reset
[20057.564856] af9013-power-ctrl: onoff:1
[20057.568983] af9013-set-adc-ctrl: adc-clock:28000
[20057.568993] af913-div: a:28000000 b:1000000 x:19
[20057.569002] af913-div: a:0 b:1000000 x:19 r:14680064 r:e00000
[20057.569008] af9013-set-adc-ctrl: adc-cw:00 00 e0
[20057.573979] af9013-init: load ofsm settings
[20057.630229] af9013-init: load tuner specific settings
[20057.684977] af9013-init: setting ts mode
[20057.686473] af9013-lock-led: onoff:1
[20057.687480] af9013-i2c-gate-ctrl: enable:1
[20057.688225] af9013-i2c-gate-ctrl: enable:1
[20057.689599] af9013-i2c-gate-ctrl: enable:0
[20057.690349] af9013-i2c-gate-ctrl: enable:1
[20057.692102] af9013-i2c-gate-ctrl: enable:0
[20057.692978] af9013-i2c-gate-ctrl: enable:1
[20057.708103] af9013-i2c-gate-ctrl: enable:0
[20057.708599] af9013-i2c-gate-ctrl: enable:0
[20057.789900] af9013-set-frontend: freq:482000000 bw:0
[20057.789914] af9013-i2c-gate-ctrl: enable:1
[20057.791984] af9013-i2c-gate-ctrl: enable:0
[20057.792724] af9013-i2c-gate-ctrl: enable:1
[20057.794098] af9013-i2c-gate-ctrl: enable:0
[20057.794984] af9013-i2c-gate-ctrl: enable:1
[20057.810104] af9013-i2c-gate-ctrl: enable:0
[20057.810598] af9013-i2c-gate-ctrl: enable:1
[20057.811977] af9013-i2c-gate-ctrl: enable:0
[20057.812805] af9013-i2c-gate-ctrl: enable:1
[20057.830352] af9013-i2c-gate-ctrl: enable:0
[20057.986992] af9013-i2c-gate-ctrl: enable:1
[20057.990222] af9013-i2c-gate-ctrl: enable:0
[20058.090765] af9013-set-coeff: adc-clock:28000 bw:0
[20058.090775] af9013-set-coeff: coeff:02 9c bc 15 05 39 78 0a 00 a7 34 3f 00 a7 2f 05 00 a7 29 cc 01 4e 5e 03
[20058.101485] af913-div: a:4570000 b:28000000 x:23
[20058.101498] af913-div: a:18560000 b:28000000 x:23 r:1369140 r:14e434
[20058.101506] af9013-set-freq-ctrl: freq-cw:cc 1b 6b
[20058.102597] af913-div: a:4570000 b:28000000 x:23
[20058.102606] af913-div: a:18560000 b:28000000 x:23 r:1369140 r:14e434
[20058.102613] af9013-set-freq-ctrl: freq-cw:cc 1b 6b
[20058.103732] af913-div: a:4570000 b:28000000 x:23
[20058.103741] af913-div: a:18560000 b:28000000 x:23 r:1369140 r:14e434
[20058.103748] af9013-set-freq-ctrl: freq-cw:34 e4 14
[20058.109474] af9013-set-frontend: auto TPS
[20058.111108] af9013-update-signal-strength
[20058.907974] af9013-get-frontend
[20060.223964] af9013-update-signal-strength
[20060.246843] af9013-update-ber-unc: err bits:99 total bits:16320000 abort count:0
[20062.155949] af9013-update-signal-strength
[20062.178571] af9013-update-ber-unc: err bits:107 total bits:16320000 abort count:0
[20063.786934] af9013-update-signal-strength
[20063.810685] af9013-update-ber-unc: err bits:159 total bits:16320000 abort count:0
[20065.522920] af9013-update-signal-strength
[20065.546670] af9013-update-ber-unc: err bits:170 total bits:16320000 abort count:0
[20067.506902] af9013-update-signal-strength
[20067.530529] af9013-update-ber-unc: err bits:73 total bits:16320000 abort count:0
[20069.778884] af9013-update-signal-strength
(loads of these)
mimo
More majordomo info at http://vger.kernel.org/majordomo-info.html
Moi!
I don't see crash here. Just normal debug logs.
Antti
More majordomo info at http://vger.kernel.org/majordomo-info.html
I don't see crash here. Just normal debug logs.
Antti
More majordomo info at http://vger.kernel.org/majordomo-info.html
Related Threads
- edit log message after commit - subversion-users
- fix netbsd build - gnu-binutils
- fix PCMCIA checksum verification - openbsd-tech
- Installation problem: Python 2.6.6 (32-Bit) on Windows 7 (32-Bit) - python-list
- Clamav-users - clamd socket not accessable. - clamav-users
- PATCH 0/2 - KVM: cleanup: get_dirty_log - linux-kvm
- Re: couchdb filters and function_clause error - couchdb-user
- Consistency issue - cassandra-user
- nbusers - bring doc of a closed source rich client into an own add-on module to it - netbeans-nbusers
- nbusers - Swing Framework No longer Supported? - netbeans-nbusers
- sipx-dev - sipxconfig fails after update from opensuse repo - sipx-dev
- Re: docs/148683: patch - connect(2) man page does not show ECONNRESET error in the list of possible errors - freebsd-doc